#
Mechanical engineering
Resource Information
The concept ** Mechanical engineering** represents the subject, aboutness, idea or notion of resources found in **Internet Archive - Open Library**.

The Resource
Mechanical engineering
Resource Information

The concept

**Mechanical engineering**represents the subject, aboutness, idea or notion of resources found in**Internet Archive - Open Library**.- Label
- Mechanical engineering

## Context

Context of Mechanical engineering#### Subject of

- 2-dimensional axisymmetric and 3-dimensional finite element stress analysis of the LHA-1 class superheater header/
- A Thermodynamic analysis of the combined steam turbine-gas turbine power cycle
- A calorimetric study of the microstructures of a thermomechanically processed Al-10.0% Mg-0.1% Zr alloy
- A combustion and heat transfer model for porpous media
- A commericial test of 350 hp Stirling boiler
- A comparative assessment of naval ship propulsion system operability : high performance vs. conventional designs
- A comparative study of a steam surface condenser computer model to field test data
- A comparative study of optimization algorithms for engineering synthesis
- A comparison of forced and natural circulation steam generators
- A comparison of high damping shape memory alloys with Cu-Mn-based and Fe-Cr-based alloys
- A comparison of integration methods for the solution of nonlinear reactor dynamics problems through the use of finite elements
- A comparison of the tube-side performance of enhanced heat transfer tubing for naval condensers
- A comparison of tripping behavior of wide and narrow flanged "T" and "Z" stiffened panels
- A computer program for solving transient heat conducting problems
- A computer program for the analysis of linearly elastic plane-stress, plane-strain problems
- A computer program for the analysis of two-dimensional heat conduction using the finite element technique
- A computer simulation of a naval boiler
- A conceptual design study of a hovering system controller for an Autonomous Underwater Vehicle
- A correlation between the heat affected zone microstructure and thermal history during welding of HY-130 steel
- A correlation for the heat transfer coefficent in a rectangular passage containing protuberance
- A curvilinear shell infinite element
- A detailed performance comparison of distillate fuels in the Texaco stratified charge engine
- A determination of particle density distributions above fluidized beds
- A discrete vortex analysis of flow about stationary and transversely oscillating circular cylinders
- A feasibility study in path planning applications using optimization techniques
- A feasibility study of heat transfer improvement in marine stream condensers
- A finite element method for optimum beam design
- A finite element preprocessor for SAP IV and ADINA
- A finite element program suitable for the Hewlett-Packard system 45 desktop computer
- A flow visualization study of laminar/turbulent transition in a curved channel
- A fluidic control system for a jet-flap airfoil
- A fluidic voice communication system and data link
- A friction and wear study of carbon in sliding contact with metal
- A further development of the Massachusetts Institute of Technology computer aided design executive system
- A general purpose three dimensional stress analysis program
- A general simulation program for robot manipulator arm dynamics
- A high-level computer graphics implementation of three-dimensional B-spline surface generation
- A manual of applied mechanics
- A manual of applied mechanics.
- A manual of applied mechanics.
- A manual of the mechanics of engineering and of the construction of machines. : Designed as a text-book for technical schools and colleges, and for the use of engineers, architects, etc.,
- A method of correlating forced convection boiling heat transfer data
- A method of incorporating bend flexibility factors in models for piping flexibility analysis
- A method of piping flexibility analysis by deflection measurements in scale models
- A microprocessor controlled autonomous sentry robot
- A multibody dynamic analysis of the N-ROSS satellite rotating flexible reflector using Kane's method
- A new method for boundary value problems
- A numerical method to determine the two-dimensional, unsteady flow about a flat plate
- A parametric analysis of a deep sea radioisotopic thermoelectric generator employing a heat pipe
- A parametric study of elastic response of submarine-installed equipment subjected to UNDEX side-on loading
- A parametric study of elastic responses of submarine-installed equipment when subjected to undex end-on loading
- A photoelastic investigation of stresses in two different pipe fittings
- A photoelastic investigation of thermal stresses
- A photographic investigation of bubble nucleation characteristics
- A photographic study of the mechanism of surface boiling at atmospheric pressure
- A pocket-book of mechanical engineering, tables, data, formulas, theory, and examples
- A preliminary investigation of the corrosion and stress-corrosion susceptibility of thermomechanically processed high magnesium aluminum magnesium alloys
- A quasi-static design model for synthetic marine towlines
- A sampling technique for the measurement of the water air ratio of a high speed spray laden air stream
- A scanning electron microscope study of the corrosion of sacrificial hull anodes under simulated ship service conditions
- A scanning electron microscope study of the effects of anode velocity and current density on the corrosion of ship hull zinc in synthetic seawater
- A simple interactive program to design supercavitating propeller blades
- A study of boiling water flow regimes at low pressure
- A study of factors affecting thrust augmentation
- A study of finite difference and finite element vertical discretization schemes for baroclinic prediction equations
- A study of friction loss for spur gear teeth
- A study of some aspects of a mild wear process
- A study of surface condenser practice
- A study of the characteristics of converging vortex flow
- A study of the damping characteristics of honeycomb sandwich constrution
- A study of the damping characteristics of honeycomb sandwich constrution
- A study of the effect of fluid contents and insulation on the vibratory behavior of pipe
- A study of the effect of interrupted quenches on a thermomechanically processed high carbon steel
- A study of the effect of processing variables on the mechanical properties of 5 inch cartridge cases
- A study of the influence of stress and temperature on the damping capacity of Mn-Cu alloys for ship silencing applications
- A study of the performance characteristics of the General Electric gas turbine
- A study of the technique of electrochemiluminescence in determining points of separation and transition
- A study of the wake region of the flow of dilute polymer solution about circular cylinders
- A study of wire mesh wick characteristics in a longitudinal heat pipe
- A test condenser to measure condensate inundation effects in a tube bundle
- A test facility to measure heat transfer performance of advanced condenser tubes
- A text-book of engineering, : for secondary technical schools,
- A textbook on mechanical and electrical engineering, Mechanical drawing
- A theoretical analysis of jet deflection from plane and axisymmetric curved obstacles
- A theoretical and experimental investigation of a tuned torsional vibration absorber
- A theoretical and experimental investigation of turbulent jet interaction
- A theoretical and experimental study of the impingement of two subsonic jets
- A theoretical and experimental study of three jet interaction
- A theoretical investigation into some aspects of wet compression
- A thermodynamic chart for the combustion process in diesel cycles
- A thermodynamic investigation of the centripetal gas turbine and its part load characteristics
- A thermodynamic relation for elastic solids
- A thermodynamic study of a representative gas turbine for design of a computer module for steady state engine monitoring and trending
- A three dimensional non-singular modelling of rigid manipulators
- A three dimensional solution of the transient field problem suing isoparametric finite elements
- A three-dimensional nonsingular simulation of rigid manipulators
- A version of the graphics-oriented interactive finite element time-sharing system (GIFTS) for an IBM with CP/CMS
- Acceleration of an unbalanced rotor through its critical speeds
- Acoustic emission analysis of fiber composite failure mechanisms
- Added mass of a circular cylinder under a free surface
- Added mass of submerged objects of arbitrary shapes
- Advanced cooling methods for marine gas turbines
- Advanced infrared detectors for future missile seekers
- Aerodynamic characteristics of an axisymmetic body undergoing a uniform pitching motion
- Aerodynamic loads on a ball-obturated tubular projectile
- Aerothermodynamics of a jet engine Test Cell
- Age and thermal diffusion length of plutonium-beryllium neutrons in poisoned water
- An advanced study of natural convection immersion cooling of 3 x 3 array of simulated components in an enclosure filled with dielectric liquid
- An algebraic propeller model using Eulerian turbomachine theory
- An analysis of a liquid desiccant dehumidifier regenerated with waste or solar power
- An analysis of smooth and axially finned, rotating heat pipe condensers
- An analysis of the performance of a vertically oriented, gas loaded, variable conductance heat pipe
- An analysis of the properties of two-dimensional incompressible fluid flow in the mixing chamber of a constant area ejector
- An analysis of the response of cylindrical ducts to internal zero mean flow, air-carried acoustic excitation
- An analytic model of gas turbine engine installations
- An analytical evaluation of spall suppression of impulsively loaded aluminum panels based on a one dimensional stress wave propagation model
- An analytical study of separated flow about a circular cylinder
- An apparatus for applying the technique of electrochemiluminescence to boundary layer studies
- An apparatus to measure dropwise condensation heat transfer coefficients of steam
- An application of optimal control theory to the FFG-7 gas turbine propulsion system
- An approach for the optimal location of modules in a marine system, with respect to its unsceduled downtime
- An approach to estimating the mission effectiveness for feasible design alternatives
- An assessment of thermal energy storage and waste heat dissipation with total energy systems for MIT
- An automatic mesh generator using two and three-dimensional isoparametric finite elements
- An electrical analogy for analysis of flow through cascades
- An electrochemical investigation of corrosion rates for 1020 steel in environments which simulate conditions in marine reinforced concrete
- An electron microscopy study of tweed microstructures and premartensitic effects in high damping 53Cu45Mn2A1 alloy
- An elementary outline of mechanical processes, : giving a brief account of the materials used in engineering construction and of the essential features in the methods of producing them, also describing shop processes and equipment for the shaping of metals into forms for engineering and general uses;
- An environmental heat transfer study of a rocket motor storage container system
- An evaluation of an experimental method for studying squeeze films
- An evaluation of magnetic mounting of accelerometers
- An evaluation of polymer coatings for the promotion of dropwise condensation of steam
- An evaluation of the gaseous-steam cycle (field cycle)
- An examination of bubble sizes in local boiling heat transfer experiments
- An experimental analysis of a mild wear process
- An experimental analysis of the stresses in a rotating disc with a concentrated load applied at the rim
- An experimental apparatus to study enhanced condensation heat transfer of steam on horizontal tubes
- An experimental comparison of enhanced heat transfer condenser tubing
- An experimental evaluation of the thermal performance of a rotating heat pipe with internal axial fins
- An experimental investigation into the dynamic response of a stiffened flat plate loaded impulsively by an underwater shockwave
- An experimental investigation of electric field intensity and wall heat transfer for the heating region of a constricted arc plasma
- An experimental investigation of enhanced heat transfer on horizontal condenser tubes
- An experimental investigation of friction at very slow sliding velocities
- An experimental investigation of heat transfer to cones in rarified hypersonic flow
- An experimental investigation of nucleate boiling in thin liquid films
- An experimental investigation of partially shrouded propellers
- An experimental investigation of pulsating subsonic flow in a conical nozzle
- An experimental investigation of the effect of adverse pressure gradient on vortex breakdown
- An experimental investigation of the effect of condensate inundation on heat transfer in a horizontal tube bundle
- An experimental investigation of the effect of surface conditions on nucleate pool boiling heat transfex to liquid nitrogen from a horizontal surface
- An experimental investigation of the effects of heat transfer during charging and blowdown of single gas receivers
- An experimental investigation of the heat transfer characteristics of a heated cylinder placed in a cross flow of air
- An experimental investigation of the pressure distribution of air in radial flow in thin films between parallel plates
- An experimental investigation of the stability of poiseuille flow
- An experimental investigation of the temperature field produced by a surgical cryoprobe
- An experimental investigation of the vortex breakdown phenomenon in a diverging tube
- An experimental investigation of wall effects on supercavitating hydrofoils of finite span
- An experimental method of design analysis using brittle material
- An experimental study into the dynamic behavior of hemispherical shells subjected to external and internal loading
- An experimental study of Taylor-Goertler vortices in a curved rectangular channel
- An experimental study of Taylor-Goertler vortices in a curved rectangular channel
- An experimental study of a magnetically excited self-acting gas lubricted thrust bearing
- An experimental study of dropwise condensation on horizontal condenser tubes
- An experimental study of dropwise condensation on vertical discs
- An experimental study of filmwise condensation on horizontal enhanced condenser tubing
- An experimental study of nucleate pool boiling heat transfer from a Gewa-T finned surface in Freon-113
- An experimental study of steam condensation on a single horizontal tube
- An experimental study of the pneumatic angular rate sensor
- An experimental technique for the study of velocity profiles in a growing droplet using a pulsed nitrogen laser
- An experimental technique for the study of velocity profiles in a laminar jet using a pulsed nitrogen laser
- An improved model for a once-through counter-cross-flow waste heat recovery unit
- An improvement of Southwell's method for determining buckling loads
- An interactive Matrix Interpretive System for the IBM 360/67
- An interactive code for a pressurized water reactor incorporating temperature and Xenon feedback
- An interactive computer program for the preliminary design and analysis of marine reduction gears
- An inverted Brayton cycle application to naval marine gas turbines
- An investigation into the comparisons of the underwater shock effects on a stiffened flat plate to the predictive nature of a computer model
- An investigation into the influence of thermomechanical processing on microstructure and mechanical properties of high-strength aluminum-magnesium alloys
- An investigation into the phenomenon of localized corrosion in various austenitic, ferritic, duplex, and cast stainless steels
- An investigation into the tripping behavior of longitudinally T-stiffened rectangular flat plates loaded statically and impulsively
- An investigation into the two-way shape memory trainability of polycrystalline Cu-Zn-Al alloys
- An investigation into the use of data bases in computer-aided naval ship design
- An investigation into the wear and friction characteristics of ship propeller shaft and sea material combinations
- An investigation of a new class of linear finite difference operators to be used in solution of partial differential equations
- An investigation of a portable device for determining lateral loads on a hollow cylinder
- An investigation of elevated temperature fatigue crack initiation in 2 1/4 Cr-1 Mo low alloy steel
- An investigation of freezing of a liquid flowing over a flat plate
- An investigation of friction in M.I.T. fourstroke geometrically similar engines
- An investigation of ground effect on vertical takeoff aircraft
- An investigation of initial yield surfaces for unidirectional reinforced composites
- An investigation of jet throttling characteristics in an incompressible flow
- An investigation of lubricant film thickness under conditions of high intensity-short duration loading
- An investigation of lubrication oil film breakdown pressures under steady and intermittent loading
- An investigation of nucleate boiling from mesh covered surfaces
- An investigation of rotating stall in a single stage axial compressor
- An investigation of some of the characteristics of a jerk pump injection system for Diesel engines
- An investigation of some of the characteristics of the magnetic injection valve for Diesel engines
- An investigation of substrate effects on type two hot corrosion of marine gas turbine materials
- An investigation of swirling flow in a convergent funnel
- An investigation of the S/N fatigue gage
- An investigation of the S/N fatigue life gage
- An investigation of the buckling caused by compressive forces existing in a thin elastic sheet, with a hole in the center, subject to uniform tension at two edges
- An investigation of the corrosion susceptibility of flame-sprayed and electric-arc sprayed anodic metal coatings of aluminum, zinc, and an aluminum-zinc alloy
- An investigation of the damping properties of Vacrosil-010
- An investigation of the effects of an electrical field on flameholder stability
- An investigation of the efficiency effects of gas turbine flexibility with bleed-off utilization
- An investigation of the feasibility of implementing substantial finite element codes on popular microcomputers
- An investigation of the hot corrosion protectivity behavior of platinum modified aluminide coatings on nickel-based superalloys
- An investigation of the mechanical properties of warm rolled aluminum-17.5 weight percent copper alloy
- An investigation of the oxide adhesion and growth characteristics on platinum modified aluminide coatings
- An investigation of the supercritical CO(2) cycle (Feher cycle) for shipboard application
- An investigation of thin lubricant films under low shear rates
- An investigation of total detonation operation of a carburetor-supplied internal combustion engine
- An investigation of vibration phenomena in torsional systems having non-linear spring characteristics
- An investigation to simulate the linear viscoelastic behavior of an elastomer
- An optimization study of a low thermal potential power system
- Analysis and synthesis of a pure fluid state attitude control system
- Analysis and testing of the thermal design of the electrical package in the U.S. Army's Upgraded Logic Module (ULM)
- Analysis of Gas Turbine Test Cell #1, Lenmoore NAS, California
- Analysis of a heated jet in a stream
- Analysis of a multi-degree of freedom vibrating system with viscous damping using the digital computer
- Analysis of a residential heating system utilizing a solar assisted water-to-air heat pump
- Analysis of air conditioning for estisting M.I.T. buildings
- Analysis of axisymmetrically loaded cylindrical and spherical pressure vessels for various loading conditions
- Analysis of central Arctic noise events
- Analysis of combustion and heat transfer in a porous graphite medium
- Analysis of combustion of a composite plate
- Analysis of combustion of a porous medium
- Analysis of exhaust turbine performance in highly supercharged, multi-cylinder, two-stroke diesel engines
- Analysis of grain refinement and superplasticity in aluminum-magnesium alloys
- Analysis of initially bent two-span columns
- Analysis of jet-crossflow interactions application to ship bow thrusters
- Analysis of magnetic amplifier with capacitive loading
- Analysis of strain gage data from submarine MSW piping
- Analysis of wave/object interaction using distributed source elements of linearly varying strengths
- Analytical and experimental investigation of constrained viscoelastic layer damping for a plate and shell model
- Analytical and experimental studies of beam waveguide absorbers for structural damping
- Analytical treatment of gravity effects on gas loaded variable conductance heat pipes
- Anchor cable dynamics
- Appleton's dictionary of machines, : mechanics, engine-work, and engineering
- Application of numerical optimization in modern control
- Application of numerical optimization to drive shaft design
- Application of numerical optimization to drive shaft design
- Application of optimization techniques to Naval surface combatant ship synthesis
- Application of the Chisholm-Laird two phase flow correlation to flow of varying quality
- Applications of inertial navigation to underwater warfare
- Applications of infrared thermography in convective heat transfer
- Applications of the science of mechanics to practical purposes,
- Applied mechanics : an elementary general introduction to the theory of structures and machines
- Applied mechanics: : an elementary general introduction to the theory of structures and machines.
- Applied mechanics; : a treatise for the use of students who have time to work experimental, numerical, and graphical exercises, illustrating the subject:
- Assessment of fuel cells and pressurized water nuclear reactors for submarine propulsion
- Augmenting the heat transfer performance of rotating two-phase thermosyphons
- Automatic control of a submersible
- Automotive welding control using a state variable model
- Ball obturation of a spin stabilized tubular projectile
- Beams on nonlinear foundations
- Boiling heat transfer with low quality steam
- Bottom and surface proximity effects on the added mass of Rankine ovoids
- Bubble nucleation from heated glass cavities
- Buckling and post-buckling behavior of a large aspect ratio orthotropic plate under combined loadings
- Calculation of the oxide growth rate of 2-1/4 Cr - 1 Mo steel in air and the subsequent measurement of the strain required to crack the oxide
- Capture coefficients of carbon dioxide and nitrogen gas on a cryogenic cooled surface
- Capture coefficients of nitrogen on a cryogenically cooled panel
- Cascade wind tunnel for transonic compressor blading studies
- Cavitation characteristics of a high ramp angle water-jet inlet
- Characteristics of a fluted nozzle gas eductor system
- Characteristics of a four nozzle, slotted mixing stack with slanted shroud, gas eductor system
- Characteristics of a four-nozzle, slotted short mixing stack with shroud, gas eductor system
- Characteristics of a pulsed packed, liquid-liquid extraction column
- Characterization of an HY-130 steel weldment by transmission electron microscopy
- Characterization of elastic solids using finite element methods
- Characterization of high damping Fe-Cr-Mo and Fe-Cr-Al alloys for naval ships application
- Characterization of preheated and non-preheated HY-80 steel weldments by transmission electron microscopy
- Characterization of submerged-arc and gas-metal-arc weldments in HY-100 steel
- Characterization of the corrosion behavior of high damping alloys in seawater
- Characterization of the structure and substructure of thermally transformation cycled Cu-Zn-Al shape memory alloys
- Characterizing and controlling the metallurgical properties of a Cu-Mn alloy for ship silencing applications
- Combined forced and free turbulent convection in a vertical tube with volume heat sources and constant wall heat addition
- Combustion gas generator for gas turbine exhaust systems modeling
- Combustion modeling of a two cylinder cycle reciprocating engine
- Comparative analysis of steering engine proposals
- Comparison of the response of shape memory alloy actuators using air-cooling and water-cooling
- Comparison of viscous and pressure energy exchange in fluid flow induction
- Composite reliability enhancement via preloading
- Composite reliability enhancement via preloading
- Composition of exhaust gases of solid injection pre-combustion chamber Diesel engine with reduced air charge
- Compressive strength of epoxy resin chocks subjected to elevated temperatures
- Computer aided data acquisition and control of an internal combustion engine
- Computer evaluation of the on-and-off design performance of an axial air turbine
- Computer model of an aviation gas turbine test facility
- Computer program for the kinetics and populations in a xenon fluoride laser
- Computer simulation and experimental validation of a dynamic model (equivalent rigid link system) on a single-link flexible manipulator
- Computer simulation of a propellant feed system for a liquid propellant gun
- Computer simulation of a rotational single-element flexible spacecraft boom
- Computerized analysis of plates in flexure by grid analogy
- Condensation heat transfer inside rotating heat pipes
- Condensation heat transfer of steam on a single horizontal tube
- Condensation heat-transfer measurements of refrigerants on externally enhanced tubes
- Condensation of CO(2) in supersonic nozzles
- Conjugated transient heat transfer in pipe flow
- Consistent stresses for the finite element stiffness method
- Construction and preliminary test of a traversing stagnation pressure probe for a labor scale aerothermopressor
- Control of embedded vortices using wall jets
- Control system simulation for a single-link flexible arm
- Control systems reliability using redundant instrumentation
- Cooling of high power generators and motors for electric propulsion
- Correlation measurements in the boundary layer of a flat plate
- Correlation of tension and torsion creep data
- Corrosion performance of high damping alloys in 3.5% sodium chloride solution
- Corrosion product morphology on zinc anodes in sea water
- Cracking tendencies of restrained welds in high strength low alloy steels under hyperbaric conditions
- Critical flow of wet steam through a well rounded orifice
- Curved wall boundary layer flow
- Cyclic strain amplitude and heat treatment effects on the high damping behavior of incramute alloy under random vibration loading in the 50-1000 HZ frequency range
- Cyclopedia of engineering : a general reference work on steam boilers, pumps, engines, and turbines, gas and oil engines, automobiles, marine and locomotive work, heating and ventilating, compressed air, refrigeration, dynamos motors, electric wiring, electric lighting, elevators, etc.
- Damped vibration absorber-force ratios
- Damping and microstructures in aged Cu-Mn based alloys
- Damping capacity testing machine
- Damping degradation in incramute and sonoston due to low temperature storage
- Data acquisition, reduction and analysis of shock and vibration testing using a super microcomputer
- Degradation of fracture toughness in steels due to prior strain : a predictive model
- Describing the source created by turbulent flow over orifices and louvers
- Design and analysis of a resistively heated surgical probe
- Design and construction of a computer controlled microthermcouple probe for the study of buoyant jets
- Design and construction of truck arrester bed research facility
- Design and development of cryogenic pumping evaluation facility
- Design and test of a dynamic balancing machine for small rotors
- Design and validation of an apparatus for high temperature fatigue testing in an inert environment
- Design features of small Brayton cycles for autonomous underwater vehicles
- Design model for the heat transfer in a short straight tube boiler
- Design of a generator for near-tangential transonic swirling outflow
- Design of a superconducting field magnet for a synchronous generator
- Design of an electrohydraulic wave follower system
- Design of pneumatic strain gage and its use in measuring deformation of small gage wire
- Design of simplified air regulator for divers
- Design of the flow distribution system for a periodic cooling tower
- Design optimization of Marine Reduction Gears
- Design proposals for torsional buckling of stiffeners
- Design study of a rarefied gas dynamics and heat transfer chamber
- Determination of Tafel constants in nonlinear polarization curves
- Determination of flow in an axial-to-radial diffuser with swirl
- Determination of the ductile to brittle transition temperature of platinum-aluminum gas turbine blade coatings
- Development of a GIFTS plotting package compatible with either PLOT10 or IBM/DSM graphidcs
- Development of a Microcomputer-based engineering Design Optimization software package
- Development of a computer program for the testing and evaluation of numerical optimization techniques
- Development of a constituitive equation for HSLA-100 at cryogenic temperatures
- Development of a design parameter for the utilization of exhaust gas energy of a two-stroke diesel engine
- Development of a floating element wall shear transducer
- Development of a nonlinear "D" type boiler model
- Development of a test procedure for sputtered gold as a solid film gear tooth lubricant
- Development of a testing technique for the yield strength determination of 5 inch steel cartridge cases
- Development of an oil-water pollution monitoring system
- Development of an oil/water pollution monitor
- Development of methods for low temperature diffusion bonding
- Digital computer analysis of rigid body problems
- Digital computer program for flexural analysis of beams
- Disclosures on various subjects : a plumbing vent manifold, a micro-adjuster, a glass joint or stopcock, and a miniature puller
- Discontinuous damping of relay servomechanisms
- Distortion removal in structural weldments
- Dual-phase nozzle flow
- Dynamic analysis of cams
- Dynamic analysis of the flexible boom in the N-ROSS Satellite
- Dynamic and fluid dynamic characteristics of a fuel injection nozzle
- Dynamic load carrying characteristics of thin oil films on gear teeth testing machine
- Dynamic structural model of a submerged ring
- Dynamical stability and maneuverability of dynamically unstable ship
- Dynamics of full annular rotor rub
- Dynamics, simulation and control of water-jet propulsion for S.E.S
- Earthquake resistant submarine drydock block system design
- Effect of blade cooling on performance of a gas turbine power plant
- Effect of boundary conditions on the damping characteristics of a randomly excited cast nickel-aluminum bronze specimen at low stress levels
- Effect of chromium addition to the low temperature hot corrosion resistence of platinum modified aluminide coatings
- Effect of friction and control parameters on the tracking accuracy of a target seeker
- Effect of included media on thermal conductance of contact joints
- Effect of interfiber spacing on the high temperature deformation of Al-Al(3)Ni composites
- Effect of longitudinal heat conduction on rotary regenerators
- Effect of mass flow on stack eductor performance
- Effect of prior warm rolling on the retained austenite content and hardening response of (VIM-VAR) AISI M-50 steel
- Effect of roll of ship on fall of shot when using direction fire
- Effect of shroud geometry on the effectiveness of a short mixing stack gas eductor model
- Effect of strain and strain rate on the microstructure of a superplastically deformed Al-10%Mg-0.1%Zr alloy
- Effect of stress on boundary lubrication by adsorption
- Effect of superposition of stress raisers on axial-load fatigue strength
- Effect of temperature and strain rate on microstructure of a deformed superplastic Al-10%Mg-0.1%Zr alloy
- Effect of temperature on the notch sensitivity of a class 303, 18-8 austenitic stainless steel
- Effect of the variation of exhaust and fuel injection timing on the General Motors diesel engine Model 1-53X3
- Effect of thermal residual stresses on the stress-strain behavior of metal-matrix composites
- Effect of thermomechanical processing on the elevated temperature behavior of lithium-containing high-Mg, Al-Mg alloys
- Effect of thermomechanical treatment on the microstructure and mechanical properties of AISI 52100 steel
- Effect of two stress raisers acting together at a point
- Effect of vapor velocity on film condensation
- Effective methods for solution of nonlinear reactor dynamics problems using finite elements
- Effects of an embedded vortex on a single film-cooling jet in a turbulent boundary layer
- Effects of annealing treatments on superplasticity in a thermomechanically processed aluminum-10.2%Mg-0.52%Mn alloy
- Effects of condensate inundation and vapor velocity on heat transfer in a condenser tube bundle
- Effects of hydrodynamic variables on corrosion : study of 90/10 cu-ni in a circling foil with synthetic seawater
- Effects of hydrodynamic variables on corrosion : study of 90/10 cu-ni in a flow channel with natural sea water
- Effects of preheat on weldments of NICOP steel
- Effects of several geometric parameters on the performance of a multiple nozzle eductor system
- Effects of thermo-mechanical processing on aluminum-magnesium alloys containing high weight percentage magnesium
- Effects of thermomechanical processing on damping characteristics of martensitic Cu 13.5 w/o Al alloy for ship silencing application
- Effects of variable properties in film cooled turbulent boundary layers
- Elastic behavior of metal interfaces
- Elastic columns under half-sine pulse loading
- Elastic-plastic analysis of a unidirectional composite under longitudinal shear
- Elastic-plastic fracture toughness testing methods
- Electrochemical state models of lead-acid batteries
- Electrohydrodynamic induction pumping in a closed conduit
- Electronic analog of a free piston gas generator
- Elementary applied mechanics,